Daylight Savings Time

In the United States and Canada where DST is observed:
Daylight Saving Time begins on the second Sunday in March.(Spring forward one hour)
Standard Time begins on the first Sunday in November. (Fall back one hour)

In the European Union:
“Summer Time” begins on the last Sunday in March. (Spring forward one hour) Standard Time begins on the last Sunday in October. (Fall back one hour)
Remember to adjust your clocks and watches one hour before going to bed on the Saturday night before.

VibraLITE 2 and VibraLITE 3:

When the CALENDAR CLOCK operating mode shows on the display.
Press & Hold the LAP/RESET button until the second(s) digits begin to BLINK.
Press the MODE button. The hour digits will begin to BLINK.
Press the START/STOP button to rotate the hour until you have set the time to the correct hour. (Remember when using
the 12 HR CLOCK TIME to have the PM indicator showing on the display.)
Push the LAP/RESET Button and the new time is set.
If you need to adjust T2 (Time 2):
Press the MODE button to rotate to T2 mode.
Use the LAP/RESET button and the START/STOP button as in setting the Calendar/Clock Mode noted above.

Push the LAP/RESET Button and the new time is set.
Note: Your Alarm settings will be activated by the time set in the Calendar/Clock Mode on the display.

VibraLITE 8:

When the CALENDAR/CLOCK MODE shows on the display.
Push and Hold the LAP/RESET Button for 3 seconds.

T-ZONE 1 will show and 1 will be flashing.
Push Mode Button,
Hour digit will flash.
Push START/STOP Button to rotate hour(s) until you have set the new time.
(Remember when using the 12 HR CLOCK TIME to use the AM and PM indicators that flash at the bottom right of the display).
Push the LAP/RESET Button and the new time is set.
If you need to adjust T-ZONE 2 or T-ZONE 3:
When the CALENDAR/CLOCK MODE shows on the display.
Push and Hold the LAP/RESET Button for 3 seconds.
T-ZONE 1 will show on display and the 1 will be flashing.
Push START/STOP Button to rotate to T-ZONE 2 (or T-ZONE 3).
Continue to set the new time by using the MODE button and START/STOP button as done for setting T-ZONE 1.

Push the LAP/RESET Button and the new time is set to the Time Zone displayed.

VibraLITE 12:

When the CALENDAR/TIME MODE shows on the display.
Hold down the “SET/RST” Button until “T-ZONE” is displayed at the top of the screen and “1”, “2” or “3” at the bottom of the screen is flashing.
Use the “ST/STP” button to select the time zone(s) you want to set.
Push “MODE” Button.
Hour digit will flash.
Push “ST/STP” Button to rotate hour(s) until you have set the new time. (Remember to note the PM indicator at the left of the display when using the 12HR CLOCK TIME)
Push the “SET/RST” Button and the new time is set.
Note: You can select the Time Zone to be displayed in the Calendar/Time Mode. (See User Manual)
Alarms respond to the Time Zone displayed.

VibraLITE “Mini”:

When the TIME screen shows on the display
Hold down the “SET/RST” button to start the flashing of Hour Digit.
Use the “ST/STP” button to set the hour.
Remember “PM” will be displayed at the left of the screen when the hour is set for PM. If the hour is set for AM, the box will be empty.
Press the “SET/RST” button to save settings.

Alarms respond to the Time Zone displayed.


Still having problems?
Email us